background image

xStack

®

 DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual

 

 

8

 

(parentheses) 

Purpose 

Indicates at least one or more of the values or arguments in the preceding syntax   
enclosed by braces must be specified.  

Syntax 

config dhcp_relay {hops <value 1-16> | time <sec 0-65535>}(1) 

Description 

In the above syntax example, users have the option to specify 

hops 

or 

time 

or both of 

them. The "(1)" following the set of braces indicates at least one argument or value within 
the braces must be specified. Do not type the parentheses.     

Example command 

config dhcp_relay hops 3 

 

Line Editing Key Usage 

Delete 

Deletes the character under the cursor and then shifts the remaining characters in the line 
to the left. 

Backspace 

Deletes the character to the left of the cursor and then shifts the remaining characters in 
the line to the left. 

Insert or Ctrl+R 

Toggle on and off. When toggled on, inserts text and shifts previous text to the right. 

Left Arrow 

Moves the cursor to the left. 

Right Arrow 

Moves the cursor to the right. 

Up Arrow 

Repeats the previously entered command. Each time the up arrow is pressed, the 
command previous to that displayed appears. This way it is possible to review the 
command history for the current session. Use the down arrow to progress sequentially 
forward through the command history list. 

Down Arrow 

The down arrow will display the next command in the command history entered in the 
current session. This displays each command sequentially as it was entered. Use the up 
arrow to review previous commands. 

Tab 

Shifts the cursor to the next field to the left. 

 

Multiple Page Display Control Keys 

Space 

Displays the next page. 

CTRL+c 

Stops the display of remaining pages when multiple pages are to be displayed. 

ESC 

Stops the display of remaining pages when multiple pages are to be displayed. 

Displays the next page. 

Displays the previous page. 

Stops the display of remaining pages when multiple pages are to be displayed. 

Refreshes the pages currently displayed. 

Displays the remaining pages without pausing between pages. 

Enter 

Displays the next line or table entry. 

Summary of Contents for xStack DGS-3400 Series















































































































































































































































































































































































































































































Reviews: