xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
50
D G S – 3 4 2 6 : 5 # s h o w s n m p h o s t
C o m m a n d : s h o w s n m p h o s t
S N M P H o s t T a b l e
H o s t I P A d d r e s s S N M P V e r s i o n C o m m u n i t y N a m e / S N M P v 3 U s e r N a m e
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
1 0 . 4 8 . 7 6 . 2 3 V 2 c p r i v a t e
1 0 . 4 8 . 7 4 . 1 0 0 V 3 a u t h p r i v p u b l i c
T o t a l E n t r i e s : 2
D G S – 3 4 2 6 : 5 #
show snmp v6host
Purpose
Used to display the IPv6 recipient of SNMP traps generated by the Switch’s SNMP agent.
Syntax
show snmp v6host {<ipv6addr>}
Description
This command is used to display the IPv6 addresses and configuration information of
remote SNMP managers that are designated as recipients of SNMP traps that are
generated by the Switch’s SNMP agent.
Parameters
v6host <ipv6addr>
−
The IPv6 address of a remote SNMP manager that will receive
SNMP traps generated by the Switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently configured IPv6 SNMP hosts on the Switch:
D G S – 3 4 2 6 : 5 # s h o w s n m p h o s t
C o m m a n d : s h o w s n m p h o s t
S N M P H o s t T a b l e
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
H o s t I P v 6 A d d r e s s : F F : : F F
S N M P V e r s i o n : V 3 n a / n p
C o m m u n i t y N a m e / S N M P v 3 U s e r N a m e : i n i t i a l
T o t a l E n t r i e s : 1
D G S – 3 4 2 6 : 5 #
enable snmp traps
Purpose
Used to enable SNMP trap support.
Syntax
enable snmp traps
Description
This command is used to enable SNMP trap support on the Switch.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To enable SNMP trap support on the Switch:
