xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
D G S – 3 4 2 6 : 5 # c o n f i g j w a c c l e a r _ q u a r a n t i n e _ s e r v e r _ u r l
C o m m a n d : c o n f i g j w a c c l e a r _ q u a r a n t i n e _ s e r v e r _ u r l
S u c c e s s .
D G S – 3 4 2 6 : 5 #
config jwac update_server
Purpose
Used to configure the servers that the PC may need to connect to in order to complete
the JWAC authentication
Syntax
config jwac update_server [add | delete] ipaddress <network_address> { [tcp_port
<tcp_port_number 1-65535> | udp_port <udp_port_number 1-65535>]}
Description
This command allows a user to add or delete server network addresses to which the
traffic from unauthenticated client hosts will not be blocked by the JWAC Switch.
Any servers that need ActiveX to accomplish authentication before the client passes the
authentication process should be added to the Switch by their IP address. For example,
the client may need to access update.microsoft.com or some Anti
–
Virus software
company’s website to check whether the OS or Anti
–
Virus software of the client is up–
to–date; and so these IP addresses need to be added to the Switch.
Parameters
add
– To add a network address to which the traffic will not be blocked
You can add 5 network addresses at most
delete
– To delete a network address to which the traffic will not be blocked
ipaddress
– To specify the network address to add or delete
To set a specific IP address, please use the format x.x.x.x/32
tcp_port
– The accessible TCP port for the specified update server network
udp_port
– The accessible UDP port for the specified update server network
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the JWAC update server:
D G S – 3 4 2 6 : 5 # c o n f i g j w a c u p d a t e _ s e r v e r a d d i p a d d r e s s 1 0 . 9 0 . 9 0 . 1 0 9 / 2 4
C o m m a n d : c o n f i g j w a c u p d a t e _ s e r v e r a d d i p a d d r e s s 1 0 . 9 0 . 9 0 . 1 0 9 / 2 4
U p d a t e s e r v e r 1 0 . 9 0 . 9 0 . 0 / 2 4 i s a d d e d
S u c c e s s .
D G S – 3 4 2 6 : 5 #
NOTE:
If the update server is linked to the JWAC enabled port on the switch, it must be added
to the static FDB correctly before it can work properly.
326
