xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
379
D G S – 3 4 2 6 : 5 # c o n f i g l l d p p o r t s a l l d o t 1 _ t l v _ p r o t o c o l _ v i d v l a n i d 1 - 3 e n a b l e
C o m m a n d : c o n f i g l l d p p o r t s a l l d o t 1 _ t l v _ p r o t o c o l _ v i d v l a n i d 1 - 3 e n a b l e
S u c c e s s .
D G S – 3 4 2 6 : 5 #
config lldp dot1_tlv_vlan_name
Purpose
Used to configure an individual port or group of ports to exclude one or more of IEEE
802.1 Organizationally VLAN name TLV data types from outbound LLDP advertisements.
Syntax
config lldp ports [<portlist> | all] dot1_tlv_vlan_name [vlan [all | <vlan_name 32> ] |
vlanid <vlanid_list> ] [enable | disable ]
Description
This TLV optional data type indicates whether the corresponding Local System’s VLAN
name instance will be transmitted on the port. If a port is associated with multiple VLANs,
those enabled VLAN IDs will be advertised.
Parameters
<portlist>
–
Use this parameter to define ports to be configured.
all
– Use this parameter to set all ports in the system.
dot1_tlv_vlan_name
– This TLV optional data type indicates whether the corresponding
Local System’s VLAN name instance will be transmitted on the port. If a port is
associated with multiple VLANs, those enabled VLAN IDs will be advertised. The default
state is disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Usage Example:
To configure exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
D G S – 3 4 2 6 : 5 # c o n f i g l l d p p o r t s a l l d o t 1 _ t l v _ v l a n _ n a m e v l a n i d 1 - 3 e n a b l e
C o m m a n d : c o n f i g l l d p p o r t s a l l d o t 1 _ t l v _ v l a n _ n a m e v l a n i d 1 - 3 e n a b l e
S u c c e s s .
D G S – 3 4 2 6 : 5 #
config lldp dot1_tlv_protocol_identity
Purpose
Used to configure an individual port or group of ports to exclude one or more of IEEE
802.1 Organizationally protocol identity TLV data types from outbound LLDP
advertisements.
Syntax
config lldp ports [<portlist> | all] dot1_tlv_ protocol_identity [all | {eapol | lacp |
gvrp | stp } (1) ] [enable | disable]
Description
This TLV optional data type indicates whether the corresponding Local System's Protocol
Identity instance will be transmitted on the port. The Protocol Identity TLV provides a way
for stations to advertise protocols that are important to the operation of the network. Such
as Spanning Tree Protocol, the Link Aggregation Control Protocol, and numerous vendor
proprietary variations are responsible for maintaining the topology and connectivity of the
network. If EAPOL, GVRP, STP(including MSTP), and LACP protocol identity is enabled
on this port and it is enabled to be advertised, then this protocol identity will be
advertised.
Parameters
<portlist>
–
Use this parameter to define ports to be configured.
all
– Use this parameter to set all ports in the system.
dot1_tlv_protocol_identity
– This TLV optional data type indicates whether the
corresponding Local System's Protocol Identity instance will be transmitted on the port.
The Protocol Identity TLV provides a way for stations to advertise protocols that are
important to the operation of the network. Such as Spanning Tree Protocol, the Link
Aggregation Control Protocol, and numerous vendor proprietary variations are
responsible for maintaining the topology and connectivity of the network. If EAPOL,
