xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
303
config sim
Purpose
Used to configure role parameters for the SIM protocol on the Switch.
Syntax
config sim [[commander {group_name <groupname 64> | candidate] | dp_interval
<sec 30–90> | hold_time <sec 100–255>]
Description
This command is used to configure parameters of switches of the SIM.
Parameters
commander
– Use this parameter to configure the commander switch(CS) for the
following parameters:
group_name <groupname 64>
– Used to update the name of the group. Enter an
alphanumeric string of up to 64 characters to rename the SIM group.
dp_interval <30–90>
– The user may set the discovery protocol interval, in
seconds that the Switch will send out discovery packets. Returning information to
the CS will include information about other switches connected to it. (Ex. MS,
CaS). The user may set the
dp_interval
from 30 to 90 seconds.
hold time <sec 100–255>
– Using this parameter, the user may set the time, in
seconds, the CS will hold information sent to it from other switches, utilizing the
discovery interval protocol. The user may set the hold time from 100 to 255
seconds.
candidate
– Used to change the role of a CS (commander) to a CaS (candidate).
dp_interval
<30–90>
– The user may set the discovery protocol interval, in
seconds that the Switch will send out discovery packets. Returning information to
the CS will include information about other switches connected to it. (Ex. MS,
CaS). The user may set the
dp_interval
from 30 to 90 seconds.
hold time <100–255>
– Using this parameter, the user may set the time, in
seconds, the Switch will hold information sent to it from other switches, utilizing
the discovery interval protocol. The user may set the hold time from 100 to 255
seconds.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To change the time interval of the discovery protocol:
D G S – 3 4 2 6 : 5 # c o n f i g s i m c o m m a n d e r
C o m m a n d : c o n f i g s i m c o m m a n d e r
S u c c e s s .
D G S – 3 4 2 6 : 5 #
To change the hold time of the discovery protocol:
D G S – 3 4 2 6 : 5 # c o n f i g s i m h o l d _ t i m e 1 2 0
C o m m a n d : c o n f i g s i m h o l d _ t i m e 1 2 0
S u c c e s s .
D G S – 3 4 2 6 : 5 #
To transfer the CS (commander) to be a CaS (candidate):
D G S – 3 4 2 6 : 5 # c o n f i g s i m c a n d i d a t e
C o m m a n d : c o n f i g s i m c a n d i d a t e
S u c c e s s .
D G S – 3 4 2 6 : 5 #
To transfer the Switch to be a CS:
