xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
19
D G S – 3 4 2 6 : 5 # e n a b l e w e b 8 0
C o m m a n d : e n a b l e w e b 8 0
N o t e : S S L w i l l b e d i s a b l e d i f w e b i s e n a b l e d .
S u c c e s s .
D G S – 3 4 2 6 : 5 #
disable web
Purpose
Used to disable the HTTP–based management software on the Switch.
Syntax
disable web
Description
This command disables the Web–based management software on the Switch.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable HTTP:
D G S – 3 4 2 6 : 5 # d i s a b l e w e b
C o m m a n d : d i s a b l e w e b
S u c c e s s .
D G S – 3 4 2 6 : 5 #
save
Purpose
Used to save changes in the Switch’s configuration to non–volatile RAM.
Syntax
save {[config <config_id 1–2> | log | all]}
Description
This command is used to enter the current switch configuration into non–volatile RAM.
The saved switch configuration will be loaded into the Switch’s memory each time the
Switch is restarted.
Parameters
config <config_id 1–2>
– Specify to save current settings to configuration file 1 or 2.
log
– Specify to save current Switch log to NV–RAM.
all
– Specify to save all configuration settings. If nothing is specified after “save”, the
Switch will save all.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non–volatile RAM:
D G S – 3 4 2 6 : 5 # s a v e
C o m m a n d : s a v e
S a v i n g a l l c o n f i g u r a t i o n s t o N V – R A M . . . D o n e .
D G S – 3 4 2 6 : 5 #
