xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
68
Example usage:
To display the packets analysis for port 7 of switch 1:
D G S – 3 4 2 6 : 5 # s h o w p a c k e t p o r t s 1 : 7
C o m m a n d : s h o w p a c k e t p o r t s 1 : 7
P o r t n u m b e r : 1 : 7
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
F r a m e S i z e / T y p e F r a m e C o u n t s F r a m e s / s e c
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6 4 2 1 3 4 4 8 1 9
6 5 - 1 2 7 6 4 3 1 8 5
1 2 8 - 2 5 5 4 2 6 5 1 0
2 5 6 - 5 1 1 1 7 6 4 7 2
5 1 2 - 1 0 2 3 1 0 2 2 5 3
1 0 2 4 - 1 5 1 8 3 0 8 0 4 7
U n i c a s t R X 6 2 8 0 7 0
M u l t i c a s t R X 7 0 9 2 5 1 5
B r o a d c a s t R X 2 3 8 7 2 8 2 1
F r a m e T y p e T o t a l T o t a l / s e c
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
R X B y t e s 8 3 9 4 7 6 0 0 1 3 7 8 0
R X F r a m e s 3 7 2 4 6 0 3 6
T X B y t e s 8 6 3 8 1 9 0
T X F r a m e s 6 6 3 3 0
C T R L + C
E S C
q
Q u i t
S P A C E
n
N e x t P a g e
p
P r e v i o u s P a g e
r
R e f r e s h
show error ports
Purpose
Used to display the error statistics for a range of ports.
Syntax
show error ports <portlist>
Description
This command will display all of the packet error statistics collected and logged by the
Switch for a given port list.
Parameters
<portlist>
−
Specifies a port or range of ports to be displayed. The port list is specified
by listing the lowest switch number and the beginning port number on that switch,
separated by a colon. Then the highest switch number, and the highest port number of
the range (also separated by a colon) are specified. The beginning and end of the port list
range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4
specifies switch number 2, port 4. 1:3–2:4 specifies all of the ports between switch 1, port
3 and switch 2, port 4
−
in numerical order. Non–contiguous portlist entries are separated
by a comma. (ex: 1:1–1:3,1:7–1:9)
Restrictions None.
Example usage:
To display the errors of the port 3 of switch 1:
