xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
312
40
C
OMMAND
H
ISTORY
L
IST
The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
?
config command_history
<value 1–40>
show command_history
Each command is listed, in detail, in the following sections.
?
Purpose
Used to display all commands in the Command Line Interface (CLI).
Syntax
? {<command>}
Description
This command is used to display all of the commands available through the Command
Line Interface (CLI).
Parameters
{<command>}
– Entering the question mark with an appropriate command will list all the
corresponding parameters for the specified command, along with a brief description of the
commands function and similar commands having the same words in the command.
Restrictions None.
Example usage:
To display all of the commands in the CLI:
D G S – 3 4 2 6 : 5 # ?
. .
?
c l e a r
c l e a r a r p t a b l e
c l e a r a t t a c k _ l o g
c l e a r c o u n t e r s
c l e a r f d b
c l e a r l o g
c l e a r p o r t _ s e c u r i t y _ e n t r y p o r t
c o n f i g 8 0 2 . 1 p d e f a u l t _ p r i o r i t y
c o n f i g 8 0 2 . 1 p u s e r _ p r i o r i t y
c o n f i g 8 0 2 . 1 x a u t h _ m o d e
c o n f i g 8 0 2 . 1 x a u t h _ p a r a m e t e r p o r t s
c o n f i g 8 0 2 . 1 x a u t h _ p r o t o c o l
c o n f i g 8 0 2 . 1 x c a p a b i l i t y p o r t s
c o n f i g 8 0 2 . 1 x i n i t
c o n f i g 8 0 2 . 1 x r e a u t h
c o n f i g a c c e s s _ p r o f i l e p r o f i l e _ i d
c o n f i g a c c o u n t
c o n f i g a d d r e s s _ b i n d i n g i p _ m a c i p a d d r e s s
c o n f i g a d d r e s s _ b i n d i n g i p _ m a c p o r t s
c o n f i g a d m i n l o c a l _ e n a b l e
c o n f i g a r p e n t r y
C T R L + C
E S C
q
Q u i t
S P A C E
n
N e x t P a g e
E N T E R
N e x t E n t r y
a
A l l
