xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
51
D G S – 3 4 2 6 : 5 # e n a b l e s n m p t r a p s
C o m m a n d : e n a b l e s n m p t r a p s
S u c c e s s .
D G S – 3 4 2 6 : 5 #
enable snmp authenticate traps
Purpose
Used to enable SNMP authentication trap support.
Syntax
enable snmp authenticate traps
Description
This command is used to enable SNMP authentication trap support on the Switch.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To turn on SNMP authentication trap support:
D G S – 3 4 2 6 : 5 # e n a b l e s n m p a u t h e n t i c a t e t r a p s
C o m m a n d : e n a b l e s n m p a u t h e n t i c a t e t r a p s
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show snmp traps
Purpose
Used to show SNMP trap support on the Switch .
Syntax
show snmp traps { linkchange_traps { ports <portlist>} }
Description
This command is used to view the SNMP trap support status currently configured on the
Switch.
Parameters
portlist
– Enter a list of ports to be displayed.
Restrictions None.
Example usage:
To view the current SNMP trap support:
D G S - 3 4 2 6 : 5 # s h o w s n m p t r a p s l i n k c h a n g e _ t r a p s p o r t s 1
C o m m a n d : s h o w s n m p t r a p s l i n k c h a n g e _ t r a p s p o r t s 1 : 1
L i n k c h a n g e T r a p : E n a b l e d
P o r t 1 : 1 : E n a b l e d
D G S - 3 4 2 6 : 5 #
