xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
330
D G S – 3 4 2 6 : 5 # c r e a t e j w a c u s e r 1 1 2 2 3 3
C o m m a n d : c r e a t e j w a c u s e r 1 1 2 2 3 3
E n t e r a c a s e – s e n s i t i v e n e w p a s s w o r d : * * *
E n t e r t h e n e w p a s s w o r d a g a i n f o r c o n f i r m a t i o n : * * *
S u c c e s s .
D G S – 3 4 2 6 : 5 #
config jwac user
Purpose
Used to update local user DB.
Syntax
config jwac user <username 15> {vlan <vlanid 1
–
4094>}
Description
This command is used to update the local user DB. Only the created user can be
configured.
Parameters
<username 15>
– The user name to be created. The max length of the username is 15
characters.
<vlanid 1-4094>
–Target VLAN ID for authenticated host which uses this user account to
pass authentication.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure a JWAC user:
D G S – 3 4 2 6 : 5 # c o n f i g j w a c u s e r 1 1 2 2 3 3
C o m m a n d : c o n f i g j w a c u s e r 1 1 2 2 3 3
E n t e r a o l d p a s s w o r d : * *
E n t e r a c a s e – s e n s i t i v e n e w p a s s w o r d : * * *
E n t e r t h e n e w p a s s w o r d a g a i n f o r c o n f i r m a t i o n : * * *
S u c c e s s .
D G S – 3 4 2 6 : 5 #
delete jwac user
Purpose
Used to delete JWAC user into local DB.
Syntax
delete jwac [user <username 15> | all_users]
Description
This command is used to delete JWAC users from the local DB.
Parameters
user
– To specify the user name to be deleted
all_user
– All user accouts in local DB will be deleted.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a JWAC user:
