xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
197
To display RADIUS settings on the Switch:
D G S – 3 4 2 6 : 5 # s h o w r a d i u s
C o m m a n d : s h o w r a d i u s
I n d e x I P A d d r e s s A u t h – P o r t A c c t – P o r t T i m e o u t R e t r a n s m i t K e y
( s e c s )
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – - - – – – – – – – – - - - - - - - - - - - - -
1 1 0 . 1 . 1 . 1 1 8 1 2 1 8 1 3 5 2 s w i t c h
1 2 0 . 1 . 1 . 1 1 8 1 2 1 8 1 3 4 2 s w k e y
1 3 0 . 1 . 1 . 1 1 8 1 2 1 8 1 3 5 3 d g s 3 4 2 6
T o t a l E n t r i e s : 3
D G S – 3 4 2 6 : 5 #
create 802.1x user
Purpose
Used to create a new 802.1X user.
Syntax
create 802.1x user <username 15>
Description
This command is used to create new 802.1X users.
Parameters
<username 15>
−
A username of up to 15 alphanumeric characters in length.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To create an 802.1X user:
D G S – 3 4 2 6 : 5 # c r e a t e 8 0 2 . 1 x u s e r R G
C o m m a n d : c r e a t e 8 0 2 . 1 x u s e r R G
E n t e r a c a s e – s e n s i t i v e n e w p a s s w o r d : * * * * * *
E n t e r t h e n e w p a s s w o r d a g a i n f o r c o n f i r m a t i o n : * * * * * *
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show 802.1x user
Purpose
Used to display the 802.1X user accounts on the Switch.
Syntax
show 802.1x user
Description
This command is used to display the 802.1X Port–based or MAC–based Network Access
control local users currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view 802.1X users currently configured on the Switch:
