xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
302
config sim_group
Purpose
Used to add candidates and delete members from the SIM group.
Syntax
config sim_group [add <candidate_id 1–100> {<password>} | delete <member_id 1–
32>]
Description
This command is used to add candidates and delete members from the SIM group by ID
number.
Parameters
add <candidate_id 1–100> <password>
– Use this parameter to change a Candidate
Switch (CaS) to a Member Switch (MS) of a SIM group. The CaS may be defined by its
ID number and a password (if necessary).
delete <member_id 1–32>
– Use this parameter to delete a member switch of a SIM
group. The member switch should be defined by ID number.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To add a member:
D G S – 3 4 2 6 : 5 # c o n f i g s i m _ g r o u p a d d 2
C o m m a n d : c o n f i g s i m _ g r o u p a d d 2
P l e a s e w a i t f o r A C K ! ! !
S I M C o n f i g S u c c e s s ! ! !
S u c c e s s .
D G S – 3 4 2 6 : 5 #
To delete a member:
D G S – 3 4 2 6 : 5 # c o n f i g s i m _ g r o u p d e l e t e 1
C o m m a n d : c o n f i g s i m _ g r o u p d e l e t e 1
P l e a s e w a i t f o r A C K ! ! !
S I M C o n f i g S u c c e s s ! ! !
S u c c e s s .
D G S – 3 4 2 6 : 5 #
