xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
313
To display the parameters for a specific command:
D G S – 3 4 2 6 : 5 # ? c o n f i g s t p
C o m m a n d : ? c o n f i g s t p
C o m m a n d : c o n f i g s t p
U s a g e : { m a x a g e < v a l u e 6 – 4 0 > | m a x h o p s < v a l u e 1 – 2 0 > | h e l l o t i m e < v a l u e 1 – 1 0 > |
f o r w a r d d e l a y < v a l u e 4 – 3 0 > | t x h o l d c o u n t < v a l u e 1 – 1 0 > | f b p d u [ e n a b l e | d i s a b l e ]
| l b d [ e n a b l e | d i s a b l e ] | l b d _ r e c o v e r _ t i m e r [ 0 | < v a l u e 6 0 – 1 0 0 0 0 0 0 > ] }
D e s c r i p t i o n : U s e d t o u p d a t e t h e S T P G l o b a l C o n f i g u r a t i o n .
c o n f i g s t p i n s t a n c e _ i d
c o n f i g s t p m s t _ c o n f i g _ i d
c o n f i g s t p m s t _ p o r t s
c o n f i g s t p p o r t s
c o n f i g s t p p r i o r i t y
c o n f i g s t p v e r s i o n
D G S – 3 4 2 6 : 5 #
config command_history
Purpose
Used to configure the command history.
Syntax
config command_history <value 1–40>
Description
This command is used to configure the command history.
Parameters
<value 1–40>
−
The number of previously executed commands maintained in the buffer.
Up to 40 of the latest executed commands may be viewed.
Restrictions None.
Example usage
To configure the command history:
D G S – 3 4 2 6 : 5 # c o n f i g c o m m a n d _ h i s t o r y 2 0
C o m m a n d : c o n f i g c o m m a n d _ h i s t o r y 2 0
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show command_history
Purpose
Used to display the command history.
Syntax
show command_history
Description
This command is used to display the command history.
Parameters None.
Restrictions None.
Example usage
To display the command history:
