xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
381
config lldp forward_message
Purpose
Used to configure the forwarding of LLDPDU packets when LLDP is disabled.
Syntax
config lldp forward_message [enable | disable]
Description
When LLDP is disabled and LLDP forward_message is enabled, the received LLDPDU
packets will be forwarded. The default state is disabled.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Usage Example:
To configure LLDP forward_message:
D G S – 3 4 2 6 : 5 # c o n f i g l l d p f o r w a r d _ m e s s a g e e n a b l e
C o m m a n d : c o n f i g l l d p f o r w a r d _ m e s s a g e e n a b l e
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show lldp
Purpose
This command displays the switch’s general LLDP configuration status.
Syntax
show lldp
Description
This command is used to display the Switch’s general LLDP configuration status.
Parameters None.
Restrictions None.
Usage Example:
To display the LLDP system level configuration status:
D G S – 3 4 2 6 : 5 # s h o w l l d p
C o m m a n d : s h o w l l d p
L L D P S y s t e m I n f o r m a t i o n
C h a s s i s I D S u b t y p e : M A C A d d r e s s
C h a s s i s I D : 0 0 - 8 0 - C 2 - 1 1 - 2 2 - 0 0
S y s t e m N a m e :
S y s t e m D e s c r i p t i o n : F a s t E t h e r n e t S w i t c h
S y s t e m C a p a b i l i t i e s : R e p e a t e r , B r i d g e
L L D P C o n f i g u r a t i o n s
L L D P S t a t u s : D i s a b l e d
L L D P F o r w a r d S t a t u s : D i s a b l e d
M e s s a g e T x I n t e r v a l : 3 0
M e s s a g e T x H o l d M u l t i p l i e r : 4
R e I n i t D e l a y : 2
T x D e l a y : 2
N o t i f i c a t i o n I n t e r v a l : 5
D G S – 3 4 2 6 : 5 #
