DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
5 Notice: normal but significant condition
6 Informational: informational messages
7 all: all-level messages
informational
− Specifies that informational messages are to be sent
to the remote host. This corresponds to number 6 from the list
above.
warning
− Specifies that warning messages are to be sent to the
remote host. This corresponds to number 4 from the list above.
all
− Specifies that
all message are to be sent to the remote host.
facility
− Some of the operating system daemons an
d processes
have been assigned facility values. Processes and daemons that
have not been explicitly assigned a facility may use any of the ‘local
use’ facilities or they may use the ‘user-level’ facility. Those facilities
that have been designated are shown in the following:
Bold font indicates the facility values that the switch currently
supports.
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog
6 line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
local0
− Specifies that local use 0 messages are to be sent to the
remote host. This corresponds to number 16 from the list above.
57
