D-Link DGS-1100-16/ME Reference Manual Download Page 124

Page: 124 / 181

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide

Example usage:

To configure SNTP settings:

DGS-1100-24P/ME:admin#config sntp ipaddress 10.1.1.1 poll_interval 60
Command : config sntp ipaddress 10.1.1.1 poll_interval 60

Success.

DGS-1100-24P/ME:admin#

show sntp

Purpose

To display the SNTP information.

Syntax

show sntp

Description

The

show sntp

command displays SNTP settings information,

including the source IP address, time source and poll interval.

Parameters

None.

Restrictions

None.

Example usage:

To display SNTP configuration information:

DGS-1100-24P/ME:admin#show sntp
Command : show sntp

Current Time Source        : System Clock
SNTP                   : Disabled
SNTP Server Ip Address    : 10.1.1.1
       Stratum             : -
       Version           : -
       Last Receive         : -
SNTP Poll Interval             : 60 sec

DGS-1100-24P/ME:admin#

115

Summary of Contents for DGS-1100-16/ME






















































































































































































Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands

D-Link DGS-1100-16/ME, Reference Manual

Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands