DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
6
BASIC SWITCH COMMANDS
The Basic Switch commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
Parameter
clear screen
create account
[admin | user] <username 15>
delete account
<username 15>
config account
<username 15>
show account
show session
show switch
show config
current_config
config jumbo_frame
ports <portlist> state [enable | disable]
show jumbo_frame
save
reboot
{force_agree}
reset
[config | system | default] {force_agree}
login
logout
ping
<ipaddr> {times <value 1-255> | timeout <sec 1-99>}
create time_range
<string 8> [daily start_time < time hh:mm > end_time<time hh:mm > | weekly
start_weekday <weekday> start_time <time hh:mm > end_weekday <weekday>
end_time <time hh:mm> ]
delete time_range
<string 8>
show time_range
config telnet
auto_logout
[2_minutes | 5_minutes | 10_minutes | 15_minutes]
show telnet
config firmware
image <1,2> boot_up
show firmware
information
create iproute
default <ipaddr>
delete iproute
default
config
command_prompt
config command_prompt [user_define <string 16> | username | default]
17
