D-Link DGS-1100-16/ME Reference Manual Download Page 107

Page: 107 / 181

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide

Success.

DGS-1100-24P/ME:admin#

disable igmp_snooping multicast_vlan

Purpose

To disable IGMP snooping multicast VLAN on the Switch.

Syntax

disable igmp_snooping multicast_vlan

Description

The

disable igmp_snooping multicast_vlan

command disables

IGMP snooping multicast VLAN on the Switch.

Parameters

None.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To disable IGMP snooping multicast VLAN on the Switch:

DGS-1100-24P/ME:admin#disable igmp_snooping multicast_vlan
Command : disable igmp_snooping multicast_vlan

Success.

DGS-1100-24P/ME:admin#

show igmp_snooping multicast_vlan

Purpose

To show the current status of IGMP snooping multicast VLAN on the

Switch.

Syntax

show igmp_snooping

multicast_vlan {name <vlan_name 8>}

Description

The

show igmp_snooping

command displays the current IGMP

snooping multicast VLAN configuration on the Switch.

Parameters

name<vlan_name 8>

− The name of the VLAN for which IGMP

snooping configuration is to be displayed. Up to 8 characters can be

used.

Restrictions

None.

Example usage:

To show igmp snooping multicast VLAN:

DGS-1100-24P/ME:admin#show igmp_snooping multicast_vlan name

test
Command : show igmp_snooping multicast_vlan name test

IGMP Multicast Global State : Disabled

VLAN Name                  : test
VID                          : 8

Summary of Contents for DGS-1100-16/ME






















































































































































































Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands

D-Link DGS-1100-16/ME, Reference Manual

Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands