D-Link DGS-1100-16/ME Reference Manual Download Page 125

Page: 125 / 181

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide

enable sntp

Purpose

To enable SNTP server support.

Syntax

enable sntp

Description

The

enable sntp

command enables SNTP server support. SNTP

service must be separately configured (see

config sntp

). Enabling

and configuring SNTP support will override any manually configured

system time settings.

Parameters

None.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To enable the SNTP function:

DGS-1100-24P/ME:admin#enable sntp
Command : enable sntp

Success.

DGS-1100-24P/ME:admin#

disable sntp

Purpose

To disable SNTP server support.

Syntax

disable sntp

Description

The

disable sntp

command disables SNTP support.

Parameters

None.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To disable SNTP support:

DGS-1100-24P/ME:admin#disable sntp
Command : disable sntp

Success.

DGS-1100-24P/ME:admin#

116

Summary of Contents for DGS-1100-16/ME






















































































































































































Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands

D-Link DGS-1100-16/ME, Reference Manual

Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands