D-Link DGS-1100-16/ME Reference Manual Download Page 93

Page: 93 / 181

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide

show management_vlan

Purpose

To display the management VLAN on the Switch.

Syntax

show management_vlan

Description

The

show management_vlan

command displays the management

VLAN information on the Switch.

Parameters

None.

Restrictions

None.

Example usage:

To display the management VLAN on the switch:

DGS-1100-24P/ME:admin#show management_vlan
Command: show management_vlan

Management VLAN

VID   state
-----   --------------
1   Disabled

DGS-1100-24P/ME:admin#

config port_vlan

Purpose

To configure the management VLAN on the Switch.

Syntax

config port_vlan <portlist> pvid <vlanid 1-4094>

Description

The

config port_vlan

command configures the port PVID of VLAN

on the Switch.

Parameters

<portlist> -

A port or range of ports to be configured the port PVID.

<vlanid 1-4094>

−

Specifies the management VLAN ID on the

Switch.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To configure the PVID of VLAN on the switch:

DGS-1100-24P/ME:admin#config port_vlan 5-8 pvid 2
Command: config port_vlan 5-8 pvid 2

Success.

DGS-1100-24P/ME:admin#

Summary of Contents for DGS-1100-16/ME






















































































































































































Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands

D-Link DGS-1100-16/ME, Reference Manual

Search results

Summary of Contents for DGS-1100-16/ME

Reviews:

Related manuals for DGS-1100-16/ME

Brands by name

Popular brands