-246-
CHASSIS
- 246-
Reverse mechanism parts
ADJUSTING REVERSE MECHANISM PARTS
Neutral
High
Low
Reverse
Select lever shift rod
NOTE:
Before shifting, you must stop the vehicle
and take your foot off the accelerator pedal.
Otherwise, the transmission may be
damaged.
1. Adjust:
• elect le er shift ro
a. Make sure the select lever is in NEUTRAL.
b. Loosen both in nuts
.
c. Adjust the shift rod length for smooth and
correct shifting
.
d. Tighten the nuts
.
Nut
23 Nm (2.3 m · kg, 17 ft · lb)
CHASSIS
- 247-
Reverse mechanism parts
CHECKING AND SERVICE OF REVERSE
MECHANISM
1. Check the mobility of gear shift handle. If it is
not working properly, remove the gear shift
Mechanism to check if the fork , ball and spring is
stuck.,in which case replace the defective
component and try again.The last way is to turn to
the professional repairman.
2. If there is lack in the gear shift mechanism ,
adjust the nut of the fork to correct position and
strengthen gear shift mechanism .
3. Remove the gear shift mechanism and check
whether the linking rod is cracked; If so, it should
be changed.
4. Check whether the bouncing spring of gear shift
mechanism is intense enough.
5. Check whether the gear is engaged correctly
and whether there are tripstop or lack. If these
situation exists, call for the maintanance staff to
test and repair it.
6. If the gear can not be engaged, we can test it
from the following aspects:
·whether the clutch can completely declutch;
·whether the gearshift is greased
reliable(whether the oil pipe of gear shift
mechanism is blocked);
· whether gear shift mechanism jams;If these
situation happens, maintanance staff would come
to test and repair it.
