-2 -
CHASSIS
- 219-
3. Install:
• gasket
• parking rake case
• parking rake case olts
22Nm (2.2 m · kg,16 ft · lb)
• O ring
4. Install:
• parking rake arm shaft
• parking rake arm
• set olt
• parking rake arm nut
NOTE:
Apply lithium-soap-based grease to the parking
brake arm shaft and set bolt.
a.
crew in the parking rake arm shaft
counterclockwise completely so that the punch
mark
ⓐ
on the parking rake arm shaft is
etween the alignment marks
ⓑ
.
NOTE:
The hole for the parking brake arm shaft has
multiple threads. If the punch mark
ⓐ
on the
parking brake arm shaft is not between the
alignment marks
ⓑ
when the parking brake
arm shaft is screwed in completely, remove the
parking brake arm shaft and screw it in from a
different starting position.
. Turn the parking rake arm shaft appro
imately
clockwise.
c. Install the parking rake arm to the parking
rake arm shaft so that the punch mark
ⓒ
on the
parking rake arm is aligne with the punch
mark
ⓐ
on the parking rake arm shaft.
. Turn the parking rake arm until it contacts the
pin
ⓓ
.
e. inger tighten the set olt.
f. Tighten the parking rake arm nut.