-25 -
CHASSIS
- 250-
No.
Part Name
Qty
Remarks
9
Joint B
2
10
Bolt M10×1.25×80
8
11
Bush
10× 23×50
8
12
Nylon bush
16
13
Hexagon flange Nut M10×1.25
10
14
Hexagon flange bolt M10×1.25×45
2
15
Hexagon Nut M12×1.25
2
16
Cotter pin 2×32
2
17
Spring washer -12
2
18
Cushion
13× 24×2 2
19
Screw M6×16
4
CHASSIS
- 251-
Front Suspension and arm
DISASSEMBLING, SERVICE AND ASSEMBLY
THE SUPPORTING ROCKER PARTS
1. Disassembling and Service
In the suspension, there is easy to appear the
problem with bushing, cotter pin and shock
absorber.
·If the left and right rocker rocks fiercely, check the
few aspect, whether the bushing of the rocker is
crushed, the middle rubber separate is aging and
chapped.
· check whether the cotter pin is credible, if it is not
instead the same spec cotter pin.
·The problem with the shock absorber and
maintain method, whether it can returns to the
position under the pressure and the torsional
spring is rupture. If it is rupture or nearly to rupture,
instead the shock absorber. whether it leak oil, if so
instead the same spec shock absorber. According
to the different request, if there is a oil cup on the
rocker, must check it whether complete and
refuels.
2. Install:
Mount fore L/R damper,up-and-down rocker arm
assembly onto the frame with Flange Bolt M10×70
(8pcs), M10 nuts (8pcs), Flange Bolt M10×70
(4pcs) and M10 Nut, self-locking (4pcs) to ensure a
torque of 40
～
45Nm.
CAUTION:
·These components should be greased with
butter before assembly.
·The surface of components can not be
cracked.
