- 7 -
ENGINE
- 170 -
• shims
①
• uni ersal oint yoke
• washer
• nut
①
NOTE
Use the universal joint holder
②
to hold the
yoke.
• uni ersal oint.
a. Install the opposite yoke into the uni ersal
oint.
. Apply wheel earing grease to the earings.
c. Install the earing onto the yoke.
CAUTION:
Check each bearing. The needles can easily
fall out of their races. Slide the yoke back
and forth on the bearings; the yoke will not
go all the way onto a bearing if a needle is
out of place.
a. Press each earing into the uni ersal oint
using a suita le socket.
NOTE
The bearing must be inserted far enough into
the universal joint so that the circlip can be
installed.
e. Install the circlip
②
into the groo e of each
earing.
• ri e shaft coupling
• washer
• nut
①
NOTE
Use the coupling gear/middle shaft tool
to hold the drive shaft coupling.
ENGINE
- 171 -
GEARCASE SHIFT LEVER AND OIL PUMP
No.
Part Name
Qty Remarks
Removing the shift lever and gearcase
Remove the parts in the order listed.
Gear case separation
1
Inner hexangular screw M8×45
1
2
Inner hexangular screw M8×40
3
3
Spring Washer 8 4
4
Flange bolt M6×45
1
5
Flange bolt M6×35
4
6
Bracket clutch cover seat
1
7
Flange bolt M6×16
2
8
Gearshift indicator
1
9
O-ring 29.6×2.4
1
10
Flange bolt M10×1.25×16
1
11
Aluminum washer
10.2× 16×1.2
1
12
Bolt M14×1.5×21
1
13
Copper washer 14×
21×1
1
