- 3-
MAINTENCE AND ADJUSTMENT OF THE UTV
- 113 -
A special wrench can be obtained at a HSUN
dealer to make this adjustment.
The spring preload setting is determined by
measuring
①
, shown in the illustration. The shorter
①
is, the lower the spring preload; the longer
distance A is, the higher the spring preload. With
each complete turn of the adjusting nut.
Spring travel setting(Front)
Maximum(hard): 140mm
Spring travel setting(Rear)
Maximum(hard): 120mm
3. Tighten the locknut.
NOTE
Always tighten the locknut against the
adjusting nut, and then tighten it to the
specified torque.
Rebound damping force
Turn the rebound damping force adjusting screw
①
in direction S to increase the rebound damping force
and thereby harden the damping, and in direction F
to decrease the rebound damping force and thereby
soften the damping.
Compression damping force
Turn the compression damping force adjusting
screw
①
(use 3.0 allen wrench) in direction
ⓐ
to
increase the compression damping force and
thereby harden the damping, and in direction
ⓑ
to
decrease the compression damping force and
thereby soften the damping.
WARNING
·Suspension components become hot during
operation. Never touch the compression
damping force adjusting screw, the rebound
damping force adjusting screw or the oil
