- -
MAINTENANCE AND ADJUSTMENT OF THE UTV
- 91 -
4. Stop the engine and check the oil level again
NOTE
Wait a few minutes until the oil settles before
checking the oil level.
NOTE
Never remove the dipsti]ck just after high speed
operation because the heated oil could spurt out.
Wait until the oil cools down before removing the
dipstick.
6. Install:
console
passenger seat
driver seat
Refer to “SEATS” in chapter 5.
CHANGING THE ENGINE OIL
Place the vehicle on a level surface.
1. Start the engine and let it warm up for several
minutes.
2. Stop the engine and place an oil pan under the
engine.
3. Remove:
driver seat
passenger seat
console
4. Remove:
dismount the following parts step by stem
oil gauge
oil-draining blind nut, crankcase
oil-draining bolt, gear box
bolt M6 x 20 ,oil filter
oil filter cover
sealing ring
paper core oil filter
5. If you need to change the oil filter core, please
follow the steps below exactly (Generally change
the oil and core after run in-time.)
Take out the oil gauge, and then dismount
and
, drain the oil.
Dismount bolt
with a pipe wrench #8,remove
and
,then take out
.
Replacement of the filter element, assembly by