-236-
CHASSIS
- 236-
ASSEMBLING THE UNIVERSAL JOINT
Install:
• uni ersal oint
a. Install the opposite yoke into the uni ersal
oint.
. Apply wheel earing grease to the earings.
c. Install the earing onto the yoke.
. Press each earing into the uni ersal oint
using a suita le socket.
CAUTION:
Check each
bearing. The needles can easily
fall out of their races. Slide the yoke
back and forth on the bearings; the yoke
will not go all the way onto a bearing if a
needle is out of plate.
NOTE:
The bearing must be inserted far enough into
the universal joint so that the circlip can be
installed.
e. Install the circlips into the groo e of each
earing.
CHASSIS
- 237-
C.V Axle, Rear Axle
No.
Part Name
Qty
Remarks
Removing the rear axle(L.&R.)
1 Circlip
2
2
Adjustable clamp
4
3
Hoop A,dust P shed
4
4
Inner rubber dust-proof
2
5 Circlip
4
6
Double off-set joint assembly
2
7
Double off-set joint assembly
2
8 Circlip
4
9
Ball bearing
4
10
Joint shaft assembly
2
11
Outer rubber dust-proof
2
12
C.V Axle, rear axle
2
