- 24-
MAINTENCE AND ADJUSTMENT OF THE UTV
- 124 -
.
b. If the tester indicates“ ”, replace the fuse.
3. Replace:
a. Turn off the ignition.
b. Install a new fuse of the proper amperage.
c. Turn on switches to verify operation of the
related electrical devices.
d. If the fuse immediately blows again, check the
electrical circuit.
Description
Current
rating
Quantity
Lighting
system fuse
15 A
1
Ignition
10 A
1
Terminal
(Auxiliary DC jack)
10 A
1
4WD(Four wheel
drive)
5A 1
Signaling
system fuse
10 A
1
Backup fuse
10 A
1
Reserve
15 A
1
Reserve
10 A
1
Reserve
5 A
1
WARNING
Ever use a fuse with a rating other than that
specified. Never use other materials in place of a
fuse. An improper fuse may
cause extensive
damage to the electrical
system, a malfunction
of the lighting and
ignition systems and could
possibly cause a fire.
4. Install:
• attery case co er
5. Close the hood.
MAINTENCE AND ADJUSTMENT OF THE UTV
- 125 -
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• hea light eam ertically
• turn the a uster in or out
①
Turning in
Headlight beam raised.
Turning out
Headlight beam lowered.
CHANGING THE HEADLIGHT BULB
Remo e
• ift the hoo up.
• hea light ul hol er co er
①
• hea light ul hol er with ul
②
• ul
NOTE
Remove the defective bulb by unhooking the
headlight bulb holder tabs
WARNING
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot.
Do not touch the bulb until it cools down.
.
