- 26-
MAINTENCE AND ADJUSTMENT OF THE UTV
- 126 -
1. Install:
• ul new
ecure the new ul with the hea light ul
hol er.
NOTE
Avoid touching the glass part of the bulb. Keep
it free from oil; otherwise, the transparency of
the glass, life of the bulb, and luminous flux will
be adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.
• hea light ul hol er with ul
• hea light ul hol er co er
• Close the hoo .
CHANGING THE TAIL/BRAKE LIGHT BULB
. Remo e
• Rear panel
•rear position lamp an stop lamp
• irection in icator lamp
②
• ecure the new ul with the rear position lamp
irection in icator lamp an stop lamp
NOTE
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot.
Do not touch the bulb until it cools down.
.
MAINTENCE AND ADJUSTMENT OF THE UTV
- 127 -
2. Install:
• ul new
ecure the new ul with the tail rake light ul
hol er.
NOTE
Avoid touching the glass part of the bulb. Keep
it free from oil; otherwise, the transparency of
the glass, life of the bulb, and luminous flux will
be adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.
• rear position lamp irection in icator lamp an
stop lamp
• e panel
.
