Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 41
|
201
Figure 5.4.5 Nivis Field Tool Device Provisioning Settings
c.
If data about the device already exists, go to
Device Provisioning
,
Manage Provisioning Data
tab, double click on the device information and check the device’s
Network ID.
In order for
the device to connect to the network, the ID must be the same as the one found in the
VR950’s MCS website, under
Gateway
,
Subnet ID.
d.
Under
Device Provisioning
,
Device Provisioning
tab, choose
Out of Band (OOB)
and press
Start
while keeping the Infrared tool pointed towards the infrared screen on the device.
e.
Once the device has been found, press
Yes
to continue to provisioning. Press
Next
when told
that Provisioning information is available and
Next
when asked to review the Provisioning
information.
f.
Keep the infrared tool pointed towards the device while in the process of provisioning, until
the status changes from
In Progress
to
Provisioned
. Press
Next
.
g.
Press
Finish
when shown the summary of the process.
