Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 186
|
201
8.3.2
Reset Profile
This section allows you to reset the VR to the default FW profile or by preserving user dependent
variables.
8.3.3
Advanced Settings
This section allows you to view/set less common configuration variables, which cannot be changed using
the classic MCS web interface, including BBR/GW/SM EUI64, JoinKey, subnetID (named FilterTargetID in
the Backbone section).
This page is for advanced users only – do not
use
unless you have been instructed exactly by a CDS
Technical Support representative regarding which values to be changed. Incorrect values may render the
router dysfunctional or may cause difficulties in tracing malfunctions.
Please see the following screen capture for the Advanced Setting section (
Figure 8.3.2)
and follow the
steps mention below:
Figure 8.3.2 Advanced Settings window
1.
in the form, select a section in the drop-down list; the Variable list will change accordingly;
2.
select a
Variable
in the drop-down list;
3.
set/edit the
Value
field and then click
Set
.
Note
:
Do not change
[GLOBAL].AN_ID
under any circumstance.
For adding a new variable, please select
Custom
near
Variable type
; the form will be empty, as shown in
the following screen capture (
Figure 8.3.3
):
