Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 132
|
201
6.
select the desired gauge type, and then click
OK
to add the device to the dashboard.
Notes
:
•
You can also add a reading to the dashboard from the Device Details page: in the
Information
pane, click the
Add to dashboard
(ATD) icon , next to a reading.
•
Up to 9 devices are supported in the dashboard.
7.2.1.2
Deleting a device
To delete a device from the dashboard, click in the top right corner of the pane. No confirmation is
required for the system to delete the pane.
7.2.2
Topology
The
Topology
page displays a graphical representation of the current network topology and allows users
to view data about the devices and the links that form between them.
The graphical representation of the Network Topology is shown in the following screen capture
(
Figure 7.2.3
):
Figure 7.2.3 Network Topology graphical representation (HART)
When you load the page, the topology graph is generated based on the latest topology information
available. The system continuously updates this information in the background based on notifications
sent by the Network Manager on network topology changes (device registering/leaving the network).
The time of the last topology information update is indicated at the top of the page. To view the latest
topology, press
Refresh
.
The registered devices are displayed on multiple levels represented as grey bands. The levels are
numbered from 0 to n, where
n
is a natural number. The level number is indicated in the upper left
