Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 147
|
201
Figure 7.2.15 Network Health sections (HART)
In the network summary section, the following information is indicated:
•
Devices Count
– the total number of registered devices, including the AP;
•
Join count
– the total number of joins of all the devices in the network;
•
Start Date
– the date and time the NM application was started;
•
Current Date
– the present time;
•
Transmission and reliability statistics based on the summary report per device.
The device communication report section consists in a table displaying the following information for
each device:
•
EUI-64 Address
– the network address of the device;
•
Join Count
– the total number of joins per device;
•
Power Status
– the battery status for the device in question; the power status can have one of
the following values:
o
0 – Nominal;
o
1 – Low;
o
2 – Critically low;
o
3 – Recharging – Low;
o
4 – Recharging – High.
Note
: In version 1.x of the Wireless HART system, battery operation mode is not supported. All devices
will report 0 – Nominal.
•
Generated
– the number of packets generated by the device;
•
All Tx
– all the packets transmitted but the selected device (including for routing purposes);
•
No ACK
– the number of packets that require acknowledgement and which were sent by the
selected device but not acknowledged by the destination device;
