Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 115
|
201
Already configured bulk transfers are displayed in a table, with the following information (
Figure 6.3.12
):
Figure 6.3.12 Bulk Transfer List window (ISA 100)
The information available in the Bulk Transfer list are, as follows:
•
EUI-64 Address
- the EUI-64 address of the source device;
•
Transfer Type
– the selected transfer protocol (UDO or BTO);
•
TsapID
;
•
Device Tag
– the device tag for the source device;
•
Status
– the status of the transfer.
The total number of items in the table is indicated in the top left corner of the table. Here you can set
the number of items to be displayed per page in the table. The default number of items displayed in a
page is 10. Paging controls in the top right corner of the table also enable you to navigate through the
other pages of the table.
You can also delete a bulk transfer, by clicking the
icon next to it. The system will require
confirmation to perform the action. Click
Yes
to delete the bulk transfer or
Cancel
to abort the action.
6.3.11.1
Adding a Bulk Transfer
To add a bulk transfer, you must perform the following actions:
1.
click the
Add Bulk Transfer
button; the
Add
form will be displayed as shown in the following
screen captures (
Figure 6.3.13
and
Figure 6.3.14
):
Figure 6.3.13 Adding a Bulk Transfer window-UDO option (ISA 100)
