Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 127
|
201
6.4.4
Custom Settings
6.4.4.1
DateTime format
This feature will allow you to switch between UTC or Local Data and Time format.
6.4.4.2
Interfaces Configuration
The Interface Configuration page allows you to enable or disable the interfaces running on the VR950.
Use this section to disable all interfaces you are not using to minimize the security risks. YGSAP and
YGSAM SSL can be left disabled.
Web access Http and Https can also be enabled or disabled, by changing the active radio button in the
Web Access
section. The default setup is for both Http and Https access.
In the following screen capture (
Figure 6.4.10
) is shown the Interface Configuration window:
Figure 6.4.10 Interface Configuration window (ISA 100)
6.5
Session
6.5.1
Change Password
The Change Password page enables you to change your own password. In this order, you must perform
the following actions:
1.
in the window, type your current password in the
Old Password
field;
2.
type the new password in the
New password
field;
3.
retype the new password in the
Confirm new password field
, for verification.
Please note that
passwords are case sensitive
.
4.
Click
Save
at the bottom of the page to save the new password, which will become your current
password.
In the following screen capture (
Figure 6.5.1
) is shown the Change Password window:
