Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 60
|
201
6
Using the Monitoring Contro1 System (MCS) for ISA 100 wireless network
6.1
Access, Authentication and Navigation
To access the MCS, type
http://<VR_IP>/app_isa/login.html
in a web browser and replace
<VR_IP>
with
the IP of the VR that supports the network. If the Gateway runs in standalone ISA100/WirelessHART
mode, the corresponding URL is
http://<VR_IP>/app/login.html.
Once the address is accessed, a login screen appears, as shown in the following screen capture
(
Figure 6.1.1
):
Figure 6.1.1 Monitoring Control System login window
You must log into the MCS with a valid username/password. The default credentials stored on the VR950
are:
•
Username:
admin
•
Password:
adminadmin
Once the credentials are entered and the access is granted, the browser will display the Device list by
default as shown in the following screen capture (
Figure 6.1.2
). For a detailed description of the Device
list, please see the
Section 6.2.3
.
The Monitoring Control System page with the Device list is shown in the following screen capture
(
Figure 6.1.2
):
