Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 66
|
201
You can also adjust the height and width to the size of the Topology pane by clicking
, or revert to
the original viewing settings by clicking
.
Links
When the page is loaded, the
Links
option located above the topology graph is selected by default. The
BBR is also selected by default in the topology graph and the Preferred ClockSource links to it are
displayed as
green
lines.
To view the Preferred ClockSource for a particular device, click on the device in the topology graph, or
select the device in the drop-down list located on top of the Topology window. The MCS will display the
device’s link to its Preferred Clocksource.
To view the Secondary ClockSource links for a selected device, check this option in the
Links Legend
.
These links are displayed in
blue
in the topology graph.
To view the transmission links between a selected device and other, check the
Links
option in the
Links
Legend
. The regular links are displayed in
black
in the topology graph.
To view all the other links formed between the network devices, check the
Show all links
option.
This option is unchecked by default.
To view the RSQI signal value for a device links, check the
Show signal quality/PER
option. The signal
quality value is displayed next to each link and is colored in the color of the respective link. For more
information about the signal see
Section 6.2.4.2
.
To view the packet error rate for a device, you must perform the following actions:
1.
check the
Show signal quality/PER
option;
2.
in the
Links Legend
, select the desired ClockSource links to display (Preferred or Secondary, or
both);
3.
click the
Get PER for selected device
button located in the
Links legend
; the PER is shown as a
percentage next to the respective link.
Contracts
To view the contracts for a selected device, you must perform the following actions:
1.
check the
Contracts
option located at the top of the topology graph;
2.
choose a device by clicking on it in the topology graph or by selecting it in the
Devices
drop-down
list located above the graph;
3.
in the
Contracts
drop-down list you will view the selected device inbound and outbound
contracts with the SM and the GW; to show a contract on the graph, select it in the list-
the contract will be represented by a
green
line if it is periodic or by a
blue
line if it is aperiodic;
the
Contracts legend
located at the bottom of the Topology page also indicates how the types of
contracts and links are represented.