Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 92
|
201
Note:
Topology Alerts will be implemented in a future version of the MCS.
6.2.10
Bulk Transfers
The Bulk Transfers page enables you to monitor the status of configured bulk transfers.
In the following screen capture (
Figure 6.2.26
) is shown the Bulk Transfers Status window:
4: Device removed from SM whitelist
error
5: Device not found SM whitelist
error
6: Invalid join key - mismatch with key from SM whitelist
error
7: Invalid challenge - already used in a Security_Join_Request
(possible retry)
error
9: SubnetID mismatch (device provisioning/SM whitelist mismatch)
error
Device Leave
1: Timeout - device does not respond to SM queries
error
2: Re-join (new join request while joined)
error
3: Parent left the network
error
4: Device removed from SM whitelist
error
Contract Alerts
Contract Establish
-
info
Contract Modify
-
info
Contract Refusal
1: Insufficient resources
error
2: Delayed (try again later)
error
3: Device not found
error
4: Contract not found (it applies to modification/renewal)
error
5: Invalid request (requested an operation that cannot be performed,
or the request contains invalid parameters)
error
6: timeout (no response to contract request). This reason can only be
set by the FD.
error
Contract Terminate
1: requested
info
2: expired
3: unjoin
Topology alerts
Parent change
-
info
Backup change
-
info
