Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 164
|
201
Figure 7.3.7 Modbus Server window (HART)
7.3.6.1
Mapping Registers
The mapping area contains two sections listings the two different groups of registers:
Input Registers
and
Holding Registers
.
The mapping between a register and a device variable is achieved by adding register line in the
appropriate section. Please note that mapping read-only variables to holding registers will not make the
variables themselves writable.
Adding a register line
To add a register line, you must perform the following actions:
1.
in an empty edit box, type the parameters in the order and format indicated in the
Help
form:
