Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 42
|
201
h.
The device will now start establishing the connection to the VR950’s network. This process
can take up to 5 minutes, depending on the number of devices in the network.
10.
If the device is being provisioned for the first time,
follow the steps under point 1, without point
a.
5.4.2
Publishing
1.
Open the VR950’s MCS website. The newly provisioned device should appear in the
Device Table
as joined.
2.
To make the device publish, under
Devices,
click on the EUI of the device and go to
Run
Commands
. Depending on the type of Honeywell device, insert the following commands and
values. Press
Execute
after each command.
a.
Read Object Attribute:
•
TSAP ID (port): 2
•
Object ID: 1
•
Attribute ID: 9
b.
Write Object Attribute:
•
TSAP ID (port): 2
•
Object ID: 8
•
Attribute ID: 2
•
Values (HEX): FE8000000000000000004E7C7F000001F0B2000503003C3201
c.
Write Object Attribute:
•
TSAP ID (port): 2
•
Object ID: 8
•
Attribute ID: 6
•
Values (HEX): 0003000100000005
d.
Write Object Attribute:
•
TSAP ID (port): 2
•
Object ID: 3
•
Attribute ID: 2
•
Index1: 1
•
Values (HEX): 10
3.
Under
Monitoring Host
, check the
Autodiscover publishers
, set
Auto Activate
to
On
and press the
Rediscover All Publishers
button.
