Compsee Apex III, Technical Reference Manual

Page: 144 / 168

Apex PDT Technical Reference Manual 9 Apex PDT Communic ations
COAM30002 Rev. 2.00 8/13/02
9-6
Procedure
1. On the Apex PDT, type
remdisk /b115-
at the DOS prompt
C:\>
.
2. Note that the
/b115-
specifies a baud rate of 115,200. Any of
the allowable baud rates can be specified here (see the specific
details under the Utility Programs section of this manual).
3. On the host PC, type
remserv a: /b115-
at the DOS
prompt
C:\>.
4. Note that the
/b115-
specifies a baud rate of 115,200 to
match that specified for use in the [remdisk.exe] program. In
the example, the
A:
drive is specified.
5. The PC drive now appears as the next drive letter on the Apex
PDT. The [remdisk.exe] program will specify the drive letter.
You can now change to this drive and copy, delete files, etc. as
if it were a local drive.