Compsee Apex III, Technical Reference Manual

Page: 134 / 168

Apex PDT Technical Reference Manual 8 Using PC Cards
COAM30002 Rev. 2.00 8/13/02
8-2
Due to the complexity and intricate nature of the Card & Socket
Services setup, the operation is not covered in the Apex PDT
Technical Reference Manual. Programmers should refer to the
Phoenix PicoCard

User’s Guide located on the Compsee Product
Support CD for detailed setup information.
Phoenix PicoCard
 
Features
q
PC Card 16 compliant
q
PCMCIA Standard Release 2.1 compliant
q
82365SL Rev. B resource compatible
q Mixed Voltage (5.0V and 3.3V) support
q Support for M-Systems' True Flash File System
q Notification of PC Card insertions and extractions
Apex PDT Factory Configuration
Compsee, Inc has previously installed the following files at the
factory prior to shipment:
[cnfignam.exe]
The [cnfignam.exe] device driver specifies which PicoCard
configuration parameters are to be used based on the selected boot
configuration. The Apex PDT is pre-configured with the
[DEFAULT] configuration.
[dpms.exe]
A Novell driver that provides memory management services.
[pcm.ini]
[pcm.ini] is the initialization file that contains the settings for all of
the modules used by PicoCard. It is rare that a user would need to
customize the
[pcm.ini] file.
[pcmata.sys]
[pcmata.sys] is the Phoenix ATA-IDE device driver that acts as an
I/O client to Card Services. [pcmata.sys] enables the Apex PDT to
access ATA-configured PC Cards as IDE hard drive devices using
an IDE partition table.