UNITIZED TRANSAXLE
Unitized Transaxle Removal
Page 16-12 2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual
16
Unitized Transaxle Removal, Continued:
13. Grasp the ends of the leaf springs at the rear of the vehicle and roll the powertrain out from under the
vehicle (Figure 16-26, Page 16-12).
14. Place blocks under the engine pan so they will completely support the engine and keep it level to the
floor (Figure 16-27, Page 16-12). See following NOTE.
NOTE: Place the blocks so they will support the engine when the transaxle is detached and moved away
from the engine.
15. Remove the drive belt.
15.1. Grasp belt midway between drive and driven clutch and pull up on belt to force the driven clutch sheaves
apart. Roll the belt counterclockwise while pulling it off driven clutch (Figure 16-28, Page 16-12).
Figure 16-25 Snubber
Figure 16-26 Remove Powertrain
Figure 16-27 Position Powertrain
Figure 16-28 Remove Drive Belt
APPROX.
ENGINE
PAN
9 in. (22.9 cm)
DRIVE CLUTCH
DRIVEN
CLUTCH
