en03d141.fm, 11.03.2008
PL12EN-1300 2008-03
91
Programming
3
Setting the screen off timer to 0 minutes will keep the backlight activated indefinitely. It is recom-
mended that the timer be activated so that the backlight lifetime can be extended.
Uncheck the Activate screen when tool I/O changes box if the screen backlight should be turned
on only when a keypad button is pressed or a keyboard key is pressed. Otherwise, any change in
external I/O (e.g. tool enable, tool start) will turn on the screen and reset the screen off timer.
The screen off timer setting is not available for TME-100 or TMEM units, and therefore is not dis-
played when connected to either via TM-COM or the Cell Manager.
utilsysset.txtE
3.13
Administration
3.13.1
Administration / Load/Save
c0
0
3
07
en
.b
mp
Fig. 3-60: Load / Save
loadsave.txtS
Using the check boxes, the user can select the parameters to load or save.
The Load <F2> soft key searches the disk media for previously-saved files and presents a dialog
so that the desired file can be selected.
The Save <F3> soft key saves the selected items to the disk media in one file. A dialog is pre-
sented that requests a file name to be specified, and this name can be modified if desired.
Unchecking the
Load IP Settings
box will preserve the active TCP/IP Ethernet settings whenever
communications settings are loaded.
loadsave.txtE