Socket Tray Enable
Socket Tray Enable is used along with Socket Tray Sel 0-2 to indi-
cate to the worker which socket to use.
Socket Tray Sel 0
Socket Tray Sel 1
Socket Tray Sel 2
Acknowledge
When this signal is ON, the "results" output signals should be
cleared and the tool cannot be started; however, the tool LEDs
should still indicate the status of the previous rundown until
cleared by another tool start or the tool ready signal.
en03d141.fm, 11.03.2008
PL12EN-1300 2008-03
43
Programming
3
All inputs are active high. They are referenced to an isolated Input Common (pin 10). When using
the in24 V (pin 1) to activate these inputs, you must connect Input Common (pin 10) and
GND (pin 11). For hardware pin location please see page 19.
Note:
When active, the Fieldbus has the priority. Refer to help page for Advanced / Fieldbus.
inputs.txtE
3.4.3
Advanced Application Builder / Outputs
c00
28
6en
.b
mp
Fig. 3-14: Outputs