System Management
Configuring System Time
Cisco RV315W Broadband Wireless VPN Router Administration Guide
96
9
Configuring System Time
Use the Time Settings page to manually configure the system time, or to
dynamically synchronize the system time with a Network Time Protocol (NTP)
server.
To configure the system time:
STEP 1
Click
System Management
>
Time Settings
. The Time Settings page opens.
The
Current System Time
field displays the current date and time.
STEP 2
In the
Set System Time
area, select the
Manually
radio button to manually set the
date and time. Enter the values in the
Date
and
Time
fields.
STEP 3
In the
Set System Time
area, select the
Dynamically
radio button to automatically
synchronize the date and time with the specified NTP servers, and then enter the
following information:
•
NTP Server 1:
Enter the IP address or domain name of the primary NTP
server.
•
NTP Server 2:
Enter the IP address or domain name of the secondary NTP
server.
STEP 4
Click
Save
to save your settings.
Configuring TR-069 Settings
TR-069 is a DSL Forum specification for CPE WAN Management Protocol (CWMP).
It defines an application layer protocol for remote management of end-user
devices. As a bidirectional SOAP/HTTP-based protocol, it provides the
communication between customer-premises equipment (CPE) and Auto
Configuration Servers (ACS).
To configure general TR-069 settings:
STEP 1
Click
System Management
>
TR-069 Settings
. The TR-069 Settings page
opens.
STEP 2
In the
TR-069 Settings
area, click
Enable
to enable the TR-069 server, or click
Disable
to disable it.
