System Management
Managing System Configuration
Cisco RV315W Broadband Wireless VPN Router Administration Guide
92
9
!
CAUTION
The Reset To Factory Defaults operation will wipe out the current settings used on
the RV315W. We recommend that you back up your current settings before
restoring the RV315W to the factory default settings.
To restore the RV315W to the factory default settings through the utility:
STEP 1
Click
System Management
>
Reset To Factory Defaults
. The Reset To Factory
Defaults page opens.
STEP 2
Click
Reset to Factory Defaults
.
STEP 3
Click
OK
. This operation reboots the unit and restores the RV315W to the factory
default settings. The settings that you have previously made to the RV315W are
lost.
Managing System Configuration
This section describes how to work with the configuration. You can perform the
following tasks to maintain system configuration:
•
Back up the settings currently used on your RV315W.
•
Restore your settings from a saved configuration file.
•
Upload the configuration to an upper-level Network Management System
(NMS).
To manage system configuration:
STEP 1
Click
System Management
>
Configuration Management
. The Configuration
Management page opens.
STEP 2
To back up the settings currently used on your RV315W, click
Backup
Configuration
. Select where to locate the configuration file, and then click
Save
.
STEP 3
To restore your setting from a saved configuration file, click
Browse
to locate and
select a saved configuration file, and then click
Import
. The system will reboot
with the loaded configuration file.
