Cisco Small Business RV315W Administration Manual Download Page 12

Page: 12 / 109

Getting Started

Product Overview

Cisco RV315W Broadband Wireless VPN Router Administration Guide

Default Settings

These are the default settings used when configuring your RV315W for the first
time.

3G USB Port

The 3G USB port connects your RV315W to a 3G wireless
network through a 3G USB device. To obtain the list of 3G
USB dongle models supported by the RV315W, go to

www.cisco.com/go/rv315w

USB Port

The USB port connects to a USB storage device to save
syslog messages.

WAN0 Port

The WAN0 (Internet) port is connected to your Internet
device, such as a cable or DSL modem.

WAN1/LAN0 Port

The WAN1/LAN0 port can be set to a secondary WAN
interface (WAN1) or an additional LAN interface (LAN0).

LAN1-8 Ports

These ports provide a LAN connection to network devices,
such as PCs, print servers, or switches.

RESET

The

RESET

button has two functions:

•

Reboot:

Press the

RESET

button for at least 1, but no

more than 5 seconds with a paper clip or a pencil tip
to reboot the unit.

•

Restore to Factory Defaults:

Press and hold the

RESET

button for more than 5 seconds to reboot the

unit and restore to factory defaults. Changes that you
have previously made to the RV315W settings are
lost.

POWER (12VDC)

The POWER port is where you connect the supplied power
adapter (12 V/3 A).

Power Switch

Powers the unit on or off.

Parameter

Default Value

Username cisco

Password

cisco

LAN IP

192.168.1.1

DHCP Range

192.168.1.100 to 192.168.1.200

Summary of Contents for Small Business RV315W














































































































Search results

Summary of Contents for Small Business RV315W

Reviews:

Related manuals for Small Business RV315W

Brands by name

Popular brands

Cisco Small Business RV315W, Administration Manual

Search results

Summary of Contents for Small Business RV315W

Reviews:

Related manuals for Small Business RV315W

Brands by name

Popular brands