Security
Configuring MAC Address Filtering
Cisco RV315W Broadband Wireless VPN Router Administration Guide
84
8
-
Single IP Address:
Controls traffic from a specific source IP address.
-
IP Address Range:
Controls traffic from a specific range of source IP
addresses.
•
Destination IP Address:
Choose one of the following options as the traffic
destination:
-
Any:
Controls traffic to any destination IP address.
-
Single IP Address:
Controls traffic to a specific destination IP address.
-
IP Address Range:
Controls traffic to a specific range of destination IP
addresses.
•
Action:
Click
Enable
to enable this policy, or click
Disable
to disable this
policy.
STEP 5
Click
Save
to save your settings.
Configuring MAC Address Filtering
MAC address filtering permits and blocks network access from specific devices
through the use of MAC address list.
To configure MAC address filtering:
STEP 1
Click
Security
>
MAC Address Filtering
. The MAC Address Filtering page opens.
STEP 2
In the
Filter Policy
area, choose one of the following filtering policies:
•
Deny Network Access:
The MAC addresses in the list are denied and all
other MAC addresses not included in the list are permitted.
•
Permit Network Access:
Only the MAC addresses in the list are permitted
and all other MAC addresses not included in the list are denied.
STEP 3
In the
MAC Address Filtering Policies
area, specify the list of MAC addresses.
Click
Add
to add a MAC address
.
The MAC Address Filtering Policy page opens.
NOTE
Up to 20 MAC addresses can be configured on the RV315W.
STEP 4
Enter the following information:
•
MAC Address:
Enter the MAC address that you want to filter.
