System Management
Restoring Factory Default Settings
Cisco RV315W Broadband Wireless VPN Router Administration Guide
91
9
STEP 3
Enter the following information:
•
Old Password:
Enter the current administrator password.
•
New Password:
Enter a new administrator password. Passwords are case
sensitive.
•
Password Confirm:
Enter the password again for confirmation.
STEP 4
Click
Save
to save your settings.
Deleting a Local User
The system administrator can remove a new added user from the local user
database.
To delete a user:
STEP 1
Click
System Management
>
User Management
. The User Management page
opens.
STEP 2
In the
Local User List
area, check the corresponding user and click
Delete
.
STEP 3
Click
OK
to delete it from the local user database.
Restoring Factory Default Settings
To restore the RV315W to the factory default settings, you can press and hold the
RESET
button on the back panel for more than 5 seconds, or perform the
Reset to
Factory Defaults
operation from web-based Configuration Utility.
!
CAUTION
During restoring to factory defaults, do NOT turn off the device, shut down the PC,
remove the cable, or interrupt the process in any way until the operation is
complete. This process should take several minutes including the reboot process.
